Engineering, Design & DFM
Bring a concept, a sketch or a finished model. We turn it into a production-ready design and run DFM to pull cost, risk and lead time out before the first chip.
CNC Machining Services
Everything a production part needs, in one building.
From first sketch to final carton. Engineering and DFM, prototyping, machining, finishing, marking, inspection, assembly and packaging, vertically integrated so you manage one relationship instead of six.
Machining, Mill, Turn, Swiss & Integrex
Multi-axis milling, turning, Swiss and Mazak Integrex multi-tasking under one roof, built for repeatable production at tight tolerances.
Prototyping & Rapid Prototyping
Industrial 3D printing and quick-turn machined prototypes to prove form, fit and function fast, then a clean bridge straight into full production.
Finishing, Deburr, Polish & Anodized Color
Automatic centrifugal deburring and mirror-finish polishing, mass-finish tumbling, plus managed anodizing in your exact color. Parts come back finished, one PO and one point of contact.
Marking, Assembly & Packaging
Fiber laser marking for traceability, sub- and full assembly, and custom packaging, so parts leave finished, branded and shipment-ready.
Inspection & Metrology
Zeiss O-Inspect CMM (optical and probe) for first-article and in-process checks, with documented dimensional accuracy on every run.
In detail
Everything we do, in one shop.
Milling
- Multi-axis milling
- High-speed aluminum & steel
- Large-envelope & heavy cuts
- Horizontal, high-volume production
Turning
- CNC turning, round & prismatic
- Y-axis live tooling
- Bar-fed, lights-out
- Mill-turn, done in one setup
Swiss / Screw
- Sliding-headstock Swiss
- 5-axis (B-axis) Swiss
- Micro & high-feature parts to microns
- High-volume bar-fed
Engineering & DFM
- CAD / CAM
- DFM review
- Design for cost
- Custom fixturing
Prototyping
- Industrial 3D printing
- Quick-turn machined prototypes
- Bridge to full production
Finishing
- Automatic centrifugal deburring
- Consistent mirror-finish polishing
- Anodizing in your exact color
- Mass-finish tumbling
- Bead blasting
Marking, Assembly & Packaging
- Fiber laser marking & serialization
- Sub- and full assembly
- Custom, ship-ready packaging
Inspection & Quality
- Zeiss O-Inspect CMM (optical + probe)
- First-article inspection
- In-process checks
- Documented dimensional reports
- AS9100 · ISO 9001 · FFL 07
Go deeper
Explore by process or material.
The floor
20 CNC machines. 6 cells. One roof.
Real equipment, real capacity. Milling, turning, multi-axis mill-turn and Swiss, backed by bar feeders and live tooling, so there is a machine matched to your part and the capacity to back the run.
3 machines Vertical Milling
Haas VF-4 SS · VF-2 SS
Automatic pallet changer for lights-out, near-continuous milling
- Config
- 1× VF-4 SS (3-axis, pallet changer), 2× VF-2 SS (4th-axis)
- Envelope
- Up to 50 × 20 × 25 in
Ideal forHousings, brackets, plates and prismatic parts with pockets, bores and tight-tolerance faces.
2 machines Vertical Milling
Doosan DNM-650 II · DNM-400
Rigid, high-torque spindles and a large envelope for heavy cuts
- Config
- DNM-650 II (4-axis), DNM-400 (3-axis)
- Envelope
- Up to 50 × 26 × 25 in, parts to ~2,200 lb
Ideal forLarger, heavier parts, deep cavities and high material removal.
1 machine Horizontal Milling
Mazak HCN-5000
Dual-pallet horizontal for lights-out, near-continuous production
- Config
- Horizontal machining center, dual-pallet
- Capacity
- 500 mm pallet, parts to ~1,540 lb
Ideal forProduction families and repeat runs, the same part right, thousands of times.
3 machines Multi-Axis Mill-Turn
Mazak Integrex 100 · 200
Mill and turn in one setup, bar-fed with multi-turret and live tooling
- Config
- 2× Integrex 100 (multi-turret), 1× Integrex 200 (live tooling)
- Capacity
- Bar to 3 in, 4-ft feeders
Ideal forComplex parts that combine turning and milling, finished complete with no re-fixturing.
4 machines Turning
Tsugami MO8 SY-II · Haas ST-10Y
Bar-fed with Y-axis live tooling for lights-out turning
- Config
- 2× Tsugami MO8 SY-II, 2× Haas ST-10Y (Y-axis, live tooling)
- Capacity
- Up to 11 × 16 in, 1.75 in bar, 4-ft feeders
Ideal forShafts, fittings, bushings and threaded parts, with milled features cut live.
7 machines Swiss / Screw
Tsugami BO326-II · SS327-5AX
12-ft bar-fed and lights-out, plus a 5-axis B-axis Swiss cell
- Config
- 6× BO326-II, 1× SS327-5AX (5-axis, B-axis)
- Capacity
- 32 mm dia, to 12.6 in length, 12-ft feeders
Ideal forSmall, intricate, high-feature parts held to microns, by the thousands.
The range
If you can spec it, we can make it.
Size
Sub-inch Swiss parts up to ~50 in milled envelopes
Volume
One-off prototype to lights-out production runs
Complexity
Multi-axis, mill-turn done in one setup
Backed by
AS9100 · ISO 9001 · FFL 07
Materials
If it can be machined, we run it. Most metals and alloys, acetals, engineering plastics and more. A sample of what comes through the shop:
AluminumStainless steelCarbon & alloy steelTool steelTitaniumBrassCopperBronzeDelrin (acetal)Ultem (PEI)PEEKNylonPTFEPolycarbonate
