CNC Machine Shop Tour

Watch the floor that makes your parts.

Real machines, real footage, sound on. From the Mazak Integrex and Swiss lathes to milling, finishing, laser marking, CMM inspection and packaging. One building in Doral, Miami, one team, start to shipment.

Manufacture US The floor in motion One building in Doral, Miami. Mill-turn, Swiss, milling, finishing and inspection, start to shipment. Sound on for the full effect.

More from the floor

Mazak Integrex Mill-turn, done in one setup Turning and milling on a single spindle. Fewer setups means tighter true position and a shorter path to your dock.

Mazak Integrex 100 Multi-axis, done-in-one Complex geometry cut complete in a single clamping, no re-fixturing, no stack-up error.

Tsugami Swiss Let the coolant flow High-pressure coolant clears chips and holds tolerance on small, precision turned parts run after run.

Tsugami Swiss Swiss precision turning High-volume turned parts held to tight tolerances, repeatable across the whole run.

Vertical milling Cut from solid Prismatic parts milled from billet across our Haas and Doosan cells.

Milling cell Roughing to finish One flow from raw stock to a finished feature, on the same floor that quotes your job.

What's on the floor

The cells you just watched, by the numbers. Swiss and screw, multi-axis Mazak, horizontal and vertical milling, and turning, all under one roof.

Swiss & Screw Machining

6× Tsugami BO 326 II · 1× Tsugami SS327-5AX

Multi-Axis · Mazak Integrex

2× Mazak Integrex 100 · 1× Mazak Integrex 200

Turning

2× Tsugami MO8 SY-II · 2× Haas ST10-Y

Horizontal Milling · Mazak

1× Mazak HCN 5000 (dual pallet)

Vertical Milling · Haas

1× Haas VF4 SS · 2× Haas VF2 SS

Vertical Milling · Doosan

1× Doosan DNM-650 II · 1× Doosan DNM-400

Our team and our work

Mazak Integrex multi-axis CNC mill-turn machine on the shop floor — Mazak Integrex, mill and turn in one setup.

Row of CNC machines running on the Manufacture US shop floor in Doral, Florida — The floor, machines running.

Machinist programming a CNC machine at the Mazak Smooth control panel — Dialing in the program at the control.

Technician placing a machined part into a bead blasting cabinet — Into the blast cabinet.

Technician bead blasting a part for a uniform surface finish — Bead blasting, finish by hand.

CNC machine operator working at a machining center — Eyes on every job.

CNC operator working at a Mazak machining center on the shop floor — Dialed in at the Mazak.

Machinist loading a part into a CNC machining center — Loaded and running.

Machinist inspecting a finished machined part at the workbench — At the bench, checking the work.

In-house photographer lighting and photographing machined parts — The most beautiful parts get photographed, and Nobor is ready.

The Manufacture US team working among the CNC machines on the shop floor — The team, on the floor.

Ivan, CNC machinist at Manufacture US, on the shop floor — Ivan, he treats your part like his own.

The Manufacture US team on the shop floor in Doral, Florida — The team behind the team.

The full Manufacture US team, including inspection and office staff, in Doral, Florida — Everyone who touches your job.

Machinist bead blasting a machined part inside a finishing cabinet — Surface finishing, one part at a time.

Coolant flowing over the cutting tool during CNC machining — Let the coolant flow.

Multi-axis CNC spindle cutting a metal part with a carbide end mill — Multi-axis cut in progress.

Complex CNC machined metal part with intricate geometry — No part too big, too small, or too complex.

Red anodized aluminum parts on an anodizing rack — Anodized red, racked and ready.

CNC machined aluminum bracket held in hand — Machined aluminum, straight off the line.

Orange anodized aluminum cap machined and finished in house — The orange anodize we finally dialed in.

Precision machined brass part held in hand — Machined brass, held to tight tolerances.

Polished aluminum part finished with in-house automated polishing — Automated polishing, all in house.

Precision machined cylindrical component beside its engineering drawing — Built to print, checked to spec.

A batch of CNC machined aluminum parts ready for a production run — From one-off to full production.

Freshly machined aluminum parts in a tray beside a CNC machine — Fresh parts off the machine.

Machined part measured on a Zeiss O-INSPECT inspection system — Zeiss inspection, measured and verified.

Dimensional inspection of a machined part with a precision gauge — Every dimension, checked.

Aluminum parts on the anodizing line receiving a colored finish — On the anodizing line, color and protection.

Coolant flooding the cutting tools inside a CNC Swiss lathe during a turning cycle — Coolant on, cutting live. A turning job mid cycle.

Coolant and metal chips flying inside a CNC lathe during high speed turning — Chips flying, exactly how it should look.

Red anodized CNC machined aluminum parts lined up in molded pulp packaging trays — A finished run, anodized red and trayed for shipping.

Close up of a Zeiss CMM ruby tip star probe used for CNC part inspection — The probe that tells us if we hit the print.

CNC turned aluminum bushings resting in a molded pulp tray after machining — Turned, deburred, and sorted.

Indexable face mill cutter with carbide inserts mounted in a CNC machine spindle — The right cutter for the job, loaded and ready.

Machined aluminum cover part clamped in a precision vise inside a CNC mill — A part in work holding, partway through its ops.

Ceramic media in a vibratory finishing bowl used to deburr CNC machined parts — Media finishing, where the sharp edges come off.

CNC machined stainless steel valve body with external threads and a milled port — Turned, milled, and threaded in one part.

Operator running a machine on the shop floor

“The people quoting your parts are the ones who will make them.”

Like what you see? Let's make your parts here.

Request a Quote

Ready for a quote? Request a Quote